WebGUI Guide
Get up and running with your new LEOX device in minutes. Follow these fundamental steps for a successful initial deployment and network configuration.
Hardware Setup & Connections
- power Connect the provided power adapter to the device and plug it into a standard power outlet.
- settings_ethernet Connect your PC directly to the LAN 1 port of the ONT using an Ethernet cable.
- settings_input_hdmi Remove the protective dust cap and carefully connect the fiber optic cable (SC/APC) to the PON port. Ensure you hear a click.
Network Settings & Login
Default IP Address
192.168.100.1
Subnet Mask
255.255.255.0
Set your computer's IP address to static (e.g. 192.168.100.2).
Open your web browser and navigate to http://192.168.100.1.
Log in using the default credentials (GPON: leox / leolabs_7, XGS-PON: admin / letmein).
This way you can connect either via webGUI or telnet.
Initial Provisioning
- router Ready to use OLT profile templates
- password WebGUI firmware upgrade: Admin -> Firmware upgrade -> Update with FW recommended by support@leolabs.pl
- memory For advanced operations and configuration we recommend using telnet.
Need more detailed instructions?
Reach out directly to our engineering support team for assistance.